Results 1 to 15 of 15
  1. #1

    Join Date
    Jan 2005
    Location
    Gwyneth Paltrow Fan Club headquarters
    Posts
    17,326
    vCash
    500
    Rep Power
    33129

    Sewing Machine Recommendations?

    I have a very sturdy sewing machine that I love, but I am thinking about getting a smaller, lighter one that would be easier to get out for short, simple jobs. Does anyone have any recommendations? I don't need fancy stitches or any elaborate computerized functions. Consumer Reports recommends the Singer 4411 so I would love to hear from anyone who has used it:
    http://www.amazon.com/SINGER-4411-Ma.../dp/B003VWXZKG
    You should never write words with numbers. Unless you're seven. Or your name is Prince. - "Weird Al" Yankovic, "Word Crimes"

  2. #2
    Registered User
    Join Date
    Aug 2006
    Posts
    535
    vCash
    500
    Rep Power
    0
    I have an old Pfaff computerized machine and absolutely love it. Any low end machine from Pfaff would be wonderful and last you a lifetime.

  3. #3
    Registered User
    Join Date
    Dec 2002
    Location
    Socialist Canada
    Posts
    4,836
    vCash
    500
    Rep Power
    0
    Pfaff...old or new - they are amazing. I have two - one I bought in 1977 and it still works as though brand new.

  4. #4

    Join Date
    Jan 2006
    Posts
    6,900
    vCash
    500
    Rep Power
    91195
    I love my two Bernina's. One made in the early 1960's the other from 1983. Both still sew like a dream. I also have an old Singer ... Black, circa 1940 or 50 and it still sews perfectly.
    A good rant is cathartic. Ranting is what keeps me sane. They always come from a different place. Take the prime minister, for example. Sometimes when I rant about him, I am angry; other times, I am just severely annoyed - it's an important distinction. - Rick Mercer

  5. #5
    snarking for AZE
    Join Date
    Aug 2005
    Location
    katbert greenhouse
    Posts
    30,175
    vCash
    2068
    Rep Power
    50062
    bernina!
    I feel like I'm in a dream. But it can't be a dream because there are no boy dancers!

  6. #6
    Registered User
    Join Date
    Aug 2006
    Posts
    535
    vCash
    500
    Rep Power
    0
    If I had to choose between buying a used Pfaff or Bernina vs. buying a new Singer or Brother sewing machine, I'd choose the used Pfaff or Bernina. You won't know it until you use the machine, but there are many things that a quality German-made machine can do that the others can't. I recall helping a friend who was making skating pants from a slippery fabric, and her Brother machine wouldn't feed the fabric right. I brought over my Pfaff, and it did the job like a champ. Ditto for sewing through leather or upholstery fabric. You just can't beat the precision and quality materials that the more expensive machines are made of. My machine is now 35 years old and sews like new. I will never buy another machine in my lifetime. That's why I spent the money up front to make a lifetime investment.

  7. #7

    Join Date
    Jan 2005
    Location
    Gwyneth Paltrow Fan Club headquarters
    Posts
    17,326
    vCash
    500
    Rep Power
    33129
    Thanks for the suggestions so far. To be more specific, though, I am looking for something lightweight and compact that would be easy to carry and set up for small jobs - I don't have a permanent sewing place in my house, so portability and size are important. If anyone has some specific model recommendations along those lines, that would be great.
    You should never write words with numbers. Unless you're seven. Or your name is Prince. - "Weird Al" Yankovic, "Word Crimes"

  8. #8
    I <3 Kozuka
    Join Date
    May 2003
    Location
    Vancouver/Seattle
    Posts
    19,220
    vCash
    730
    Rep Power
    44756
    I don't know much about the newer models, because I've had a 1960's Singer model since I was 12, but how often would you use it, and for what kind of sewing? Pfaffs and Berninas are the gold standards -- all of the costume people I know swear by Bernina -- but do you need one that good?

    There's a Pfaff place that sells other brands as well on Granville and 6th or 7th, and I've read some good things about a place in Maple Ridge called Haney:
    http://www.haneysewingandsound.ca/ab...r-history.html

    ETA: I just clicked your link, and I don't know of new Pfaffs or Berninas in the $120 (before tax) price range.
    "The team doesn't get automatic capacity because management is mad" -- Greg Smith, agile guy

  9. #9
    Registered User
    Join Date
    Feb 2007
    Location
    Iowa
    Posts
    11,026
    vCash
    500
    Rep Power
    0
    Quote Originally Posted by kwanfan1818 View Post
    ETA: I just clicked your link, and I don't know of new Pfaffs or Berninas in the $120 (before tax) price range.
    No, Bernina you are going to need another 0 on the end of that. Even a used Bernina is going to be tough to find under $300-500.


    If you are looking for a mass market machine at an under $150, I recommend this one: http://www.amazon.com/dp/B000JQM1DE Personally, if I was going for the Walmart level machine (under $200), I'd go for a Brother over the Singer. Singer has name recognition, but I have been really unimpressed with their low level machines.

    Now, Brother has two levels of machines- their mass market, and their dealer level. The mass market machines are not high quality. They are intro-level only; but they get most jobs done. I know a number of people who do garment sewing on this machine and have made wonderful things. I know many people who have pieced quilt tops on this machine and are very happy. It doesn't have much room to do actual quilting though. You can make simple bags on it; but once the layers really start packing up, it will be difficult. You may have trouble hemming jeans, due to lack of power- but if you take it slow, it should be able to do a decent job.

    But if you sew a lot, you're going to need to spend more money. It seems like $400-600 is kind of the minimum to get a well powered, quality machine. Janome will have a few in that range, so will Brother's dealer level machines. My sewing machine (Bernina 430) was over $2000, and was the least expensive full size machine they had (they had 3/4 size machines that were slightly less. Don't bother with their Bernette's in my opinion.) However, since I've gotten it, I've sewed way more than I ever did before, because it makes sewing a joy. And it hems through all the layers of a jeans fold as if there isn't a gigantic bump at the seam. And I've sew a bag that had 64 layers in the seam, had to slow down a little, but the machine didn't even flinch.
    Last edited by Skittl1321; 08-08-2013 at 02:37 PM.

  10. #10
    Registered User
    Join Date
    Aug 2006
    Posts
    535
    vCash
    500
    Rep Power
    0
    Check with your local sewing machine store or a sew & vac repair shop to see if they have any used Pfaff or Bernina machines for sale. Here is a review of the machine I own which echoes why I bought a Pfaff and love it: http://sewing.about.com/u/sty/sewing...ner-Review.htm. It seems that used Pfaffs in the $400 range do come up for sale on eBay from time to time.

  11. #11
    Registered User
    Join Date
    Aug 2006
    Posts
    535
    vCash
    500
    Rep Power
    0
    I just looked on eBay for "Pfaff sewing machines" and found these listings that look promising: http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40. Prices range from $350-800.

  12. #12

    Join Date
    Jun 2002
    Location
    in my underground bunker plotting your downfall
    Posts
    1,709
    vCash
    500
    Rep Power
    5211
    I have a 1973 Kenmore and a 1994 Bernina, both of which do an excellent job. I agree with madm's suggestion about checking with a local sewing machine store. Check with a fabric store, too. They frequently have used machines for sale that come in when customers want to upgrade. They will check out the machine and do any repair work that might be needed. Some quilt shops offer discounts for trade-ins and then sell the trade-ins at good prices.

    I don't have a Singer 4411, but the reviews on Amazon are mostly positive, and it will probably work very well for what you want it for. You may want to check http://sewing.patternreview.com/SewingMachine/, too. They have customer reviews on many sewing machines, and a forum where you can post any questions you may have.

    I bought a 1975 Bernina from a friend of a friend and paid $50 for it. My great-niece is learning to sew and wanted a sewing machine. My brother paid $10 for an old Bernina that was sold at an estate sale.

    Bernina uses more metal in their machines as opposed to some manufacturers who use more plastic. The same is probably true of any high-quality machine, but I've looked only at Bernina since I already own one and love it. It's a pain to lug it to a quilting class, but it's a great machine that sews accurately without a lot of noise and bouncing around, unlike some of the machines I've seen in my classes.

    I also have a 1951 Featherweight that a friend gave me. Some people like to bring these to class because they don't weigh much, but I prefer to use my Bernina. My friend had had the Featherweight serviced at a sew and vac repair shop. I took it to a maintenance class at a local quilt shop that sells Bernina and services Featherweights, too. Their repair person told me the belt the sew and vac shop had put on it was not the right type and was one of the reasons why the machine wasn't sewing accurately. For any sewing machine repairs, it's better to take your machine to a shop that sells your particular brand. At this particular quilt shop, the owner and repair people go to Bernina University each year and are always up to date on all Bernina products.
    When I'm old, I don't want them to say of me, "She's so charming." I want them to say, "Be careful, I think she's armed."
    Fact of Life: After Monday and Tuesday even the calendar says W T F

  13. #13
    INTJ
    Join Date
    Jan 2004
    Posts
    4,116
    vCash
    500
    Rep Power
    0
    My advice would be don't bother. I use my mom's husquvarna sewing machine all the time even though I have a smaller, lighter, more portable machine. After using a really good machine I just get frustrated with my cheap machine even for small things which is all I do. The hassle of borrowing my mom's is worth it compared to the frustration of my machine. I did buy her a rolling bag for hers so that it's a little more portable. As always though, ymmv.
    "Beautiful things don't ask for attention." -The Secret Life of Walter Mitty

  14. #14
    Registered User
    Join Date
    Feb 2007
    Location
    Iowa
    Posts
    11,026
    vCash
    500
    Rep Power
    0
    Quote Originally Posted by made_in_canada View Post
    My advice would be don't bother.
    I just re-read the first post, and I agree. I clicked the link and thought this was someone looking for a cheap sewing machine. If you haven't used a good one, they are usually okay-ish, at least for a beginner. Someone who has sewn on a good machine is going to hate the cheap ones.

    Just keep your eyes out for a used machine at a good price. Or look into rolling bags to take your machine to classes.

  15. #15

    Join Date
    Jan 2005
    Location
    Gwyneth Paltrow Fan Club headquarters
    Posts
    17,326
    vCash
    500
    Rep Power
    33129
    Thanks, all, this is very useful. The machine I have now sews everything, and I do mean everything, so I have an alternative for more difficult tasks - I'm looking for a machine that I can set up quickly and go with if I have a smaller job. I will check out the recommended sources and see what I can find!
    You should never write words with numbers. Unless you're seven. Or your name is Prince. - "Weird Al" Yankovic, "Word Crimes"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •